Skip to main content

PMI test for stainless plate

Positive Material Identification (PMI) of stainless steel sheets for tube shields is critical to verifying the grade and composition of stainless steel before it goes into production.

Comments

Post a Comment

shield

Snap rings for Tubes Erosion Shields

Snap rings are used in conjunction with Boiler Tubes Erosion Shields, which is a clip that easily installs Boiler Tubes Erosion Shields to the tube. The snap ring and Boiler Tubes Erosion Shields are overlapped and welded, generally about 190-200 degrees Erosion Shields is a 180-degree semicircle), but also leave a welding position for easy welding and fixing. Generally, each piece of Boiler Tubes Erosion Shields needs to be equipped with 2-4 snap rings with a pitch of 200-500mm. The anti-wear snap ring is also called clamp, buckle, tube clamp, etc. The main role of the anti-wear tile snap ring: the role of fixing the anti-wear tile to avoid problems such as the anti-wear tile falling off during installation. The types of common anti-wear tile rings can be divided into: U-shaped lap type snap ring, butt-type semicircular snap ring. Install erosion shields with snap ring The snap ring is a short section that is installed on the pipe in conjunction with the wear-resistant tile. Generally...
Post a Comment
Read more

Boiler Tubes Erosion Shields

Boiler Tubes Erosion Shields, also known as anti-corrosion Shields, anti-wear plate, anti-wear protection Shields, anti-wear cover plate, anti-corrosion cover plate, boiler climbing pipe, anti-wear pressure plate, etc. , which are used in combination with snap rings. Processing thickness of Boiler Tubes Erosion Shields Boiler Tubes Erosion Shields are processed in thicknesses of 2mm, 3mm, 4mm, and 5mm. Different thickness is adopted according to the wear severity and the need of heat conduction. Boiler Tubes Erosion Shields are produced using a high-pressure press and professional mold pressing. The production time is short, the welding performance is good, the welding should not fall off, the surface is smooth, and the appearance is beautiful. Boiler Tubes Erosion Shields with bends are formed by pressing on a press or bending with a special abrasive on a tube bender. Boiler erssion shield for protection boiler tube Boiler Erosion Shields Ash content, high furnace temperature, increas...
Post a Comment
Read more

Application of Tubes Erosion Shields

Tubes Erosion Shields are mainly used on the windward side of the heating surface of the boiler, such as superheaters, reheaters, economizers, and water-cooled wall pipes. The main role is to protect the heating surface of the boiler pipes, reduce pipeline wear, and increase the heating surface of the pipes. Service life. In general, most of them are called "wear-resistant tile" and "wear-resistant cover plate". Erosion Shields are special boiler accessories. Generally, most of them are used in power station boilers, small boilers are used less, and some coal chemical industries will also use them. Erosion shields are used to protect boiler tubing from the highly erosive effects of high temperatures and pressures thereby greatly extending tube life. We offer shielding for tubing, covering straight, bent and finned sections, as well as the clips that hold these in place. In the long term, these shields more than pay for themselves, preventing the costly replacement o...
Post a Comment
Read more